To ensure the normal operation of hydraulic lifting platforms, oil tanks are essential. The selection of oil tanks is crucial, as it is closely related to the operation and safety of mechanical equipment. Therefore, choosing a fuel tank is crucial! So what are the challenges to consider when using an oil tank for a hydraulic lifting platform?
1. To consider its volume, portable machinery and equipment generally take 2-3 times the total flow rate of the pump, while fixed machinery and equipment take 3-4 times. The fuel consumption of hydraulic lifting platforms is very alarming, so in order to avoid endangering normal work, using a large space oil tank is a better choice, which can effectively prevent the situation of low oil. Therefore, when using it, attention should be paid to this situation. Overall, the standard that must be exceeded is to ensure that all normal applications can be ensured while also ensuring that the operation of mechanical equipment is not affected or endangered.
2. Considering the oil level in the fuel tank, when all hydraulic cylinders in the system software extend outward, the oil level in the tank must not be less than the minimum oil level. When the hydraulic cylinder contracts, the oil level must not be higher than the oil level.
3. Considering the structure of the fuel tank, the partition inside the traditional fuel tank cannot effectively sink and fix dirt. A vertical partition should be installed along the longitudinal centerline of the fuel tank, with one end of the partition leaving a space in the middle of the tank end plate to connect the indoor spaces on both sides of the partition. The layout of the hydraulic pump's inlet and outlet holes is not on either side of the connected partition, resulting in a relatively long distance between the inlet and pump oil. The hydraulic fuel tank also has some heat pipe heat dissipation effect.
{4}
